I had some issues with the screens and usb devices after upgrading from Windows 8 to Windows 10 the other day. It was only one screen that was working and none of the USB devices where working.
When trying to update the driver for HP Port Replicator 3005 pr I got the following error message: “A previous uninstall of HP Port Replicator Software is not yet complete. Please reboot your computer and run this installer again to installation.”
I tried several solutions to solve the issue but none of the ones I found on the internet helped me. Most of the problems was solved with the compability mode but for some reason that was not good enough for me. After some troubleshooting I discovered that it failed during the update of the displaylink software. I then downloaded the Display Link software manually and tried to run the setup. I got a message saying that the installation had failed (I don’t have a screenshot or the correct words).
When I did the complete uninstall of the DisplayLink software I was able to install the port replicator driver. The uninstall software can be found here. The software is named “DisplayLink Installation Cleaner” and starts a command window where you will press enter to remove the old software.
Networks and rants 
Have you had any other problems with this particular port replicator? I have had my start menu and Metro apps stop working from time to time, immediately after connecting the port replicator. The problem persists even after I disconnect from it. It seems there are some drivers that are interfering with Windows 10, but I can’t figure out how to reverse it. It could also have to do with the monitor (Samsung B2240W).
I havent had any other issues than what I mentioned. But the first step to troubleshoot would be to disconnect everything from the replicator and connect the computer. If nothing stops to work and seems normal I would connect device by device to the replicator and see when you get an issue.
Anyone out there have issues with (Hot Docking) seems like when we have users just disconnect the USB with the laptop powered on the ICON come back different sizes. Seem to fix if you log off and back on, but they are use to hot docking.
Have you tried to check the screen resolution when the issue occurs? Are you then able to adjust the resolution and does the icons get smaller when you do?
It sounds to me that it’s a driver issue.
Worked for me, thank you!
Your welcome! Glad it worked!
Just found (you?) link this from the HP support forums… after hours of trying and searching I stumbled across this which worked straight away! Thanks!
Glad it worked for you. Spent hours to get it to work myself!
Didn’t work for me… Still get the same error screen when trying to install…
Many Thanks
Solved an issue that was very frustrating
No problem, glad it worked for you
No problem, happy to hear it worked for you
I don’t commonly comment but I gotta admit thanks for the
post on this perfect one :D.
Worked Great Thanks
I Ran the DisplayLink Cleaner and made sure all DisplayLink programs were deleted from my computer. Yet I still get the same message: “A previous uninstall of HP Port Replicator Software is not yet complete. Please reboot your computer and run this installer again to installation.” I have also tried to get the software online that did not work either. I have a Dell computer, would it be a compatibility issue?